Xantech Door DPC100 Uživatelský manuál stáhnout pdf

08905106B - 1 -

INSTALLATION INSTRUCTIONS

DPC100

Doorbell / Paging Controller

DESCRIPTION

The DPC100 is a Doorbell / Paging Controller that can be combined with a MRC88CTL to provide

whole-house paging and doorbell capability. Adding the Doorbell Communicator (DCSS or DCBB)

and Doorbell Communicator Hub (DCH4) with the MRC88CTL system creates a complete entry

control and paging solution. The DPC100 can also provide “Music on hold” for an existing phone line.

SPECIFICATIONS

 Power: 120VAC/13.8VAC 1.25Amp, UL listed adaptor provided.

 Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”)

 Shipping Weight: 1.36 kg (3 lbs)

 Environmental: 0C to 32C (32F to 90F) with 5% to 95% non-condensing humidity.

 REN: 0.5A

 Max Doorbell Switch Wire Run: 305m (1000 ft) max, 24 AWG

 Max Load on Page Trigger Output: 1kOhm

 Talk Battery: 36VDC

1 2 3 4 5 6

08905106B - 1 - INSTALLATION INSTRUCTIONS DPC100 Doorbell / Paging Controller DESCRIPTION The DPC100 is a Doorbell / Paging Controller that

08905106B - 2 - 1. Power supply connection. Be sure to use the included power supply only. 2. Doorbell Switch Input (lighted or non-lighted)

08905106B - 3 - APPLICATION

08905106B - 4 - OPERATION A. Paging To page throughout the house/small business, simply press #, then 7 (the letter “P” key on your keypad). S

08905106B - 5 - I. Door Chime (Doorbell Switch Input) With DIP switch 2 in the OFF position (see DIP Switch Programming, page 2), the doorbell

08905106B - 6 - FCC REQUIREMENTS This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the side o

Žádné komentáře

Xantech Door DPC100 Uživatelský manuál